Pressure gauge

pressure gauge diagram

Thermocouple gauges and thermistor gauges work in this manner using thermocouple or thermistorrespectively, to measure the temperature of the heated wire.

Accordingly, the testing of the pressure by means of a pressure gauge is a widespread standard in many areas of industry, including petrochemical, chemical and food industry. Spinning-rotor gauge[ edit ] The spinning-rotor gauge works by measuring the amount a rotating ball is slowed by the viscosity of the gas being measured.

Thanks to various analog and digital displays and adjustment or calibration of all pressure gauges, display errors or measurement errors can be minimized.

Pressure gauge types

Magnetic Measures the displacement of a diaphragm by means of changes in inductance reluctance , LVDT , Hall effect , or by eddy current principle. The pressure sensor is a fully active Wheatstone bridge which has been temperature compensated and offset adjusted by means of thick film, laser trimmed resistors. The calibration of an ion gauge is unstable and dependent on the nature of the gases being measured, which is not always known. As differential pressure increases, a magnet attached to either a piston or rubber diaphragm moves. Piezoresistive Silicon Pressure Sensor The Sensor is generally a temperature compensated, piezoresistive silicon pressure sensor chosen for its excellent performance and long-term stability. They consist of a semicircular and flat tube of metal, fixed at one end and attached to a sensitive lever mechanism at the other. In the hot cathode version, an electrically heated filament produces an electron beam. The different style of tubing, the size of the tube and the material it is made out of all vary based on the pressure range. It is most useful in calibration and research laboratories where high accuracy is required and qualified technicians are available. Piezoelectric Uses the piezoelectric effect in certain materials such as quartz to measure the strain upon the sensing mechanism due to pressure. Fewer ions will be produced by lower density gases. They are many types of gauge styles, the most common being Bourdon tubes and bellow gauges. Metal strain gauge The strain gauge is generally glued foil strain gauge or deposited thin-film strain gauge onto a membrane. Kobold pressure switches and pressure gauges offer a wide range of different solutions for various production environments. Gauges help to ensure there are no leaks or pressure changes that could affect the operating condition of the hydraulic system.

These features include: a forged brass case to prevent resonant frequencies from destroying internal components; a liquid-filled case to protect the gauge from vibration and extreme pressure cycles; and a restrictor to prevent damage to the gauge from pressure spikes. A thermocouple or resistance thermometer RTD can then be used to measure the temperature of the filament.

The principle behind cold cathode version is the same, except that electrons are produced in the discharge of a high voltage.

diaphragm pressure gauge

Especially in the field of modern measurement technology, plate spring, tube spring and capillary pressure gauges play an important role. Pressure switches ensure the necessary safety In closed systems, pressure can be a huge risk factor, which must be minimized as much as possible.

pressure gauge working principle
Rated 9/10 based on 110 review
What is a pressure gauge?